| |
Mynah
Модератор
Откуда: Пермь
Регистрация: Окт. 2004
Всего: 469 сообщений
|
i'm confused :( my previous post - mistake.
i change values to 0 - 0 and then found it button at left top of control.frm.
U can assign X and Y more than FF. All values in da fallout2.exe stored in motorola format.
For example:
FA000000 == 0xFA
FA010000 == 0x1FA
FC340000 == 0x34FC
But, then i tried move button on position more than 280, party member control was closing after opening with no my actions. It not works :(
I will be think.
-----
Scio me nihil scire
|
Отправлено: 11:10 - 7 Июля, 2005
|
|
Mario Dweller
Member
Откуда: Prague, CZ
Регистрация: Апр. 2004
Всего: 22 сообщения
|
Do you mean 280 in hex (640 in dec) ? I tried to assign 0x279 and the same result... I think vale more than FF causes party member control closing after opening... :-\
-----
Drink nuka-cola !
|
Отправлено: 12:06 - 7 Июля, 2005 | ИСПРАВЛЕНО: Mario Dweller - 13:10 - 7 July, 2005
|
|
Mynah
Модератор
Откуда: Пермь
Регистрация: Окт. 2004
Всего: 469 сообщений
|
Цитата:
Do you mean 280 in hex (640 in dec) ?
Yes.
Цитата:
vale more than FF causes party member control closing after opening
Value 0x255 work correctly. It work if button fully drawn on screen. No position changes needed. Need change sizes of button or fill with NOP call to drawing button function.
-----
Scio me nihil scire
|
Отправлено: 12:16 - 7 Июля, 2005
|
|
Mario Dweller
Member
Откуда: Prague, CZ
Регистрация: Апр. 2004
Всего: 22 сообщения
|
Yes, U'r right... I'm sorry...
But I don't know how to find that function... I'm lame in assembler :-\... I tried to fill with NOPs some function, but not good effect... Either no effect or it crashes :D
-----
Drink nuka-cola !
|
Отправлено: 12:33 - 7 Июля, 2005
|
|
Mario Dweller
Member
Откуда: Prague, CZ
Регистрация: Апр. 2004
Всего: 22 сообщения
|
But size of the button is 44898C:
PUSH 0E
I changed it to
PUSH 0
And it works...
Thank you for your time 
-----
Drink nuka-cola !
|
Отправлено: 11:56 - 8 Июля, 2005
|
|
| |